Installation Tips

The installation process for the lightweight panels is very simple.

You have two options to affix the panel: Firstly, you can use grab adhesive and screws to attach it directly to the wall by fixing through the felt backing. Alternatively, you can use our VHB double sided tape.

Installation in 3 simple steps

What do I need?

Step 01
  • Paper tape
  • Adhesive glue
  • Black screws or Double sided tape
  • Tape Measure
  • Circle Saw with new fine blade
  • Screwdriver
  • Grab Adhesive
  • Pencil
  • Spirit Level

Preparation

Step 02

Trim the panels to the desired width using a fine-toothed hand saw or make a vertical cut in the felt using a sharp utility knife. After determining the necessary length, place paper tape over the cutting line to prevent the veneer from chipping. Make sure to use a new fine-toothed blade for the best results.

Installation Methods

Step 03

You’ll need grab adhesive and a caulking gun for attaching the panels to the wall.

Alternatively, you can use 15 black drywall screws per panel, measuring 3.5mm x 35mm, along with appropriate wall plugs.

Special Discount Available to Trade Contractors & Bulk Buyers. Click Here